Welcome to Shenzhen Bogao Marking Technology Co. Ltd.
Service Hotline:
138-0885-1890

News

Contact Us

You are here:Home >> News >> Industry information...

Industry information

Operation specification of automatic round bottle labeling machine

Time:2019-10-09 Views:731
      The labels of all kinds of round products that we see on a daily basis, many of them are operated by the round bottle labeling machine. Since the introduction of this machine, people no longer need to manually label, thus greatly improving production efficiency. When using the full-automatic round bottle fixed-point labeling machine, it should check whether the height and width of the conveyor belt guardrail have been adjusted to conform to the bottle body. It should smoothly pass through the material, otherwise it should be adjusted. Check whether the height and front and rear position of the bottle separating wheel have been adjusted to conform to the bottle body. The bottle should pass through uniformly individually. Otherwise, it should be adjusted. As for the inspection of the full-automatic round bottle fixed-point labeling machine, it is also necessary to determine whether the position of the push plate has been adjusted to conform to the bottle body. It is required that the spacing between the push plate and the bottle belt is slightly less than the bottle diameter, so that the label can be rolled and pasted on the bottle body smoothly.
Round bottle labeling machine
      I. boot operation
      1. Turn on the power switch of the equipment, which is generally located on the right side of the cabinet.
      2, rotate the compressed air switch to the open position, if it is used with the printer, to adjust the air pressure of the equipment is 0.5 ~ 0.6Mpa.
      3. Click on the touch screen controller of the round bottle labeling machine and enter the normal operation page.
      operation
       1. Manual operation to check whether all parts have been adjusted to fit and run smoothly; otherwise, stop the machine for appropriate adjustment.
      2. Invoke and confirm the corresponding product program or enter the "parameter setting" interface for parameter setting.
      3. Set the counter value of the round bottle labeling machine according to the actual needs of the work.
      4. Press the start button to run the machine online and enter the normal production state.
      5. Press the emergency stop switch in case of equipment failure or emergency.
      Three, shutdown procedures
      1, press the "stop" button, the whole system will stop immediately, and then turn off the main power switch.
      2. In case of emergency, press the emergency stop switch directly; When the emergency stop switch or power switch is reopened, the system should be in a safe state.
      3. When the round bottle labeling is not used for a long time, unplug the power cord, clean the surface of the machine and cover the dust cover.
Copyright © 2019 Shenzhen Bogao Marking Technology Co. Ltd. All Rights Reserved. 粤ICP备19100904号   
Web Design—Tiandixin