Welcome to Shenzhen Bogao Marking Technology Co. Ltd.
Service Hotline:
138-0885-1890

News

Contact Us

You are here:Home >> News >> Industry information...

Industry information

What is a foldable labeling machine?

Time:2019-09-16 Views:903
      In our daily life, it is believed that we rarely pay attention to a detail like this: on the wires, data lines and wires, there will be a long label with barcode printed on the label and other precautions: so how does this long label come from? Do you stick it manually? Artificial paste up will not be not neat? Is actually used the folded labeling machine, folded labeling machine, applied to the need to wire, pipe, round bar, or other special interface folded attached with a tag on the product, such as the power cord, hose, steel wire brush, car intelligent navigation wiring harness, audio and video line, anfang series cable and wiring all kinds of computer peripheral products such as folded on labels.
Folding labeling machine
      The wire folding and labeling machine has the following characteristics: its working efficiency is up to 3,000-3,600pcs/hour. As long as the diameter is 2~12mm, the wire of circular wire, flat wire, round pipe and flat pipe can be labeled. A labeling machine is a device for sticking a sticker (paper or metal foil) on a PCB, product or specified package. Labeling machine is an indispensable part of modern packaging. At present, the types of labeling machines produced in China are gradually increasing, and the technical level has been greatly improved, which has changed from a backward situation of manual and semi-automatic labeling to a situation where fully automatic high-speed labeling machines occupy a large market. At the beginning of the working process, boxes feed to labeling machines at a constant speed on the conveyor belt. Mechanical fixtures separate the boxes by a fixed distance and push the boxes in the direction of the conveyor belt. The mechanical system of the labeling machine consists of a drive wheel, a labeling wheel, and a reel. The drive wheel intermittently drags the label belt, which is pulled from the reel and pressed against the box by the label wheel. An open-loop displacement control is used on the reels to maintain the tension of the label straps, which must stop and start because the labels are attached to each other.
       The label is attached to the box at the same speed as the label wheel. When the belt reaches a certain position, the drive wheel of the tag belt accelerates to the speed of the belt, and after the tag is attached, slows down to stop.
      Since the tag may slide, it has a registration mark on it to ensure that each tag is properly placed. The registration mark is read by a sensor, and during the tag deceleration phase, the drive wheel repositions to correct any position errors on the tag.
Copyright © 2019 Shenzhen Bogao Marking Technology Co. Ltd. All Rights Reserved. 粤ICP备19100904号   
Web Design—Tiandixin