Welcome to Shenzhen Bogao Marking Technology Co. Ltd.
+86 13808851890
Share to:

automatic on the following a considerate label machine

Product parameters
Product width: 10mm-170mm
Product height: 50mm-150mm
Label length: 15mm-300mm
Label width: 10mm-160mm
Labeling accuracy: ±1mm (excluding product labels and other errors)
Labeling speed: 0-110 PCS/min (output is related to labeling product size and label size)
Label range: label outer diameter: within 300mm; label inner diameter: 76mm
Equipment weight: about 280kg
Equipment dimensions: (length x width x height) : 1700mmx1500mmx1750mm
Applicable label: sticker, dry film, electronic supervision code, bar code, etc.
Applicable products: requirements in the plane, large radian surface, flat surface attached with a label or film products.
Application industry: widely used in electronics, hardware, plastics, chemical industry and other industries.
Application industry: widely used in food, medicine, express, daily chemical, electronics, hardware, plastic and other industries;
Application examples: flat bottle label, square bottle, round bottle label.
Product details
    automatic on the following a considerate label machine
    Product application:
          Automatic upper and lower double labeling machine belongs to the marking machine series, for the production of non-standard, is a specially designed for the following labeling requirements on the plane of the automatic labeling equipment, such as customer products for mobile phones under the label on the box, the following label on the medicine box, boxes below label and so on, at the same time, this equipment can also be widely used in round, square, flat, and other products of the single side labeling and on the following label has high generality.
    Working principle:
    Turn on the switch start labeling machine, the operating interface (display) click start automatic labeling, the labeling machine up and down side of the conveyor belt and entrainment began to run, labeling head also enter the working state, when you need to label products into the conveyor belt conveying and movement to the appointed place, tested electric eye capture the signal and feedback signal to the PLC CPU, signal after dealing with the PLC CPU speed, control of labeling machine actuators operate, on the following label mark magic eye detection in transmission, label be transported out and on to the product need to stick mark on the specified location, product by double repeat again the authority standard, Top and bottom labeling of a product is completed.
    Operation mode:
    Put the product into the corner labeling machine conveyor belt (connected pipeline) -- > product conveying (automatic realization) -- > product correction (automatic realization) -- > product detection (automatic realization) -- > labeling (automatic realization) -- upper surface labeling (automatic realization) -- > collection of labeled products.
    Sticker production requirements:
    The interval between labels is 2-4mm;
    The label is 2mm away from the bottom edge of the paper;
    Label backing paper with gracing material backing paper, such backing paper toughness to prevent breaking (avoid cutting the backing paper);
    Coil core inner diameter 76mm, outer diameter less than 260mm, single row arrangement.
    The above label production needs to be combined with your product, please contact our engineers for specific requirements and the result shall prevail!
    Product features:
    1 with fault alarm function, production counting function, energy-saving function, production number setting prompt function, parameter setting protection function.
    The belt can be adjusted arbitrarily in the range to improve the compatibility of the equipment to different products
    3. Stick labels firmly and do not fall off. On the plane part of the label, roller rolling label stick firmly, side plane part, brush touch press stick firmly;
    4. High stability, set the top pressing mechanism, high stability of box conveying, good labeling and overcoating effect;
    5. Intelligent control, automatic photoelectric tracking, with no labeling, no labeling automatic correction and label automatic detection functions, to prevent missing labeling and label waste;
    6. High stability, the advanced electronic control system composed of mitsubishi PLC+ Taiwan velon touch screen + needle shaped electric eye + sickle measuring label electric eye, supporting 7×24 hours operation of the equipment;
    7. Intelligent control, automatic photoelectric tracking, with no labeling, no labeling automatic correction and label automatic detection functions, to prevent missing labeling and label waste;
    8. Touch screen operation interface, full Chinese annotation and perfect fault prompt function, simple and quick adjustment of various parameters, convenient operation;
    Optional functions and components:
    (1) hot code/spray code function;
    (2) automatic feeding function (combined with product consideration);
    (3) automatic feeding function (combined with product considerations);
    (4) increase labeling device;
    Other functions (customized according to customer requirements)